What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 24.06.2025 02:18

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Upvotes:
This is where this question deviates from being a 'generic' question, and becomes more specific.
Cole? Kyle? Whatever the name, M's thrilled to see Young arrive in majors - The Seattle Times
It also is a device that limits the change in current flow.
but this device (an Inductor) … impedes the rapid changes in the current.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Now when you have a certain ac resistance, then a current flows in a loop.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
(Dc diagram shown, AC is similar).
So, the voltage could go up to 500 volts, and the fuse will not open up.
What To Expect In Wednesday's Report On Inflation - Investopedia
For this case there are devices called Metal oxide varistors (MOV).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This is where the MOV conducts again, and dissipated the energy.
Discovery of a Lifetime: Student Discovers Ancient “Living Fossil” Underneath Rock - SciTechDaily
2024–10–16 [ OO OLAOYE OYEBODE ]
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
He then asserts :
An AC voltage/ current source, and an ac inductive load.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
What does a fuse do?
John Stamos reveals he broke news of Brian Wilson's death to Mike Love - ABC News
There are two important concepts here.
a photo is worth a thousand words.
I post the exact comment here.
Day One Highlights at Pro Tour Magic: The Gathering®—FINAL FANTASY™ - magic.gg
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
The other is “what does a “fuse” do?”
eight
Does being poor build better character than being born rich?
Here is a simplified AC power diagram.
The bolt then partially travels down the line to your home.
A circuit breaker is similar, but is resettable.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
The third is lightning and “how it gets conducted into a home.”
Risk Of Dengue Fever Is Just Another Reason Cruises Suck - Jalopnik
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
The MOV will conduct when the voltage exceeds 50% of line voltage.
He then describes Rainy Season and Lightning.
Ad eveniet eaque et magni illum.
A fuse is a non-resetable over current circuit protector.
But… the neutral is now “floating” because of the 1 ohm resistance.
[image of Common-mode choke]
Have you ever heard of the god Priapus being the same as the god Phosphorus?
There are three different concepts here that are getting confused.
It seems Mohan does not understand the difference between a comment and an Answer.
Barnstars:
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
nine
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
One
but I think this circuit , shows a few more pieces.
This device then solves the entire problem.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–10–10[John johnson John Johnson ]
Can the fuse protect the electronic devices from lightning instead of a surge protector.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
At least they know the answer if they wanted it.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
In schematic diagrams this is the symbol for a fuse:
what exactly is a ‘surge’ protector?
This is 'the assistant's answer'
One is “what exactly is in a ‘surge protector’ ? ”
At one ohm, the resistor has a maximum of 1 watt power.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
These devices are installed between the “hot” and “neutral” and protective ground.
But it can get overloaded, and no longer works.
so, what happens?
Edit 2024–10.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Because the load is inductive, the current lags the voltage.(by a bit).
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This one hit behind the barn.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
What is lightning?
the problem then depends on "how fast does the fuse operate?".
These are simplified answers to the original question, and does not change anything I wrote above.
First Sentence:
[old diagram got deleted by accident]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
He then describes the function of a fuse.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”